Failure Configuring Windows Updates Reverting Changes Windows 7

Failure configuring windows updates reverting changes windows 7 - Hello Guys Do you have a laptop / pc with windows operating system? Have you ever read or seen any posts on your laptop or pc like this' failure configuring windows updates reverting changes ..... if it is, you can follow the steps below.

Be patient and wait

You should be patient and wait for about 30 minutes, and keep the charger plugged in to your device. Then wait 'Failure configuring windows update, Reverting Changes' until the process is complete, usually this process will restarting 3-4 times. Do not leave your device, because this process can be up to 1 hour more, do not get the device off / sleep. When the process is complete will appear welcome and boot look as usual.


If you are impatient or windows updates fail

Do it this way: Sign in to Dos Prompt - sign in to Dos Prompt. To access Dos Prompt press f8 at boot time and select or click repair computer. After that type the command sfc / scannow Then reboot. The message will appear again and wait a few minutes then we will get into windows again.


If your laptop or pc dies suddenly, or you turn off your laptop / pc then you turn back, then the screen appears black color, as shown below

1. Select safe mode

2. Wait a while laptop loading to go into windows

3. Change settings windows update your laptop becomes inactive in the following way:

3.1. Go to the START menu
3.2. Look for control panel

3.3. Click on system and security

3.4. On the windows update menu right underneath it says "Turn automatic updating on or off" as in the picture below the arrow number 2.

     

Then you will be brought in the display options as in the following picture:

1.1. On the "Important update" menu point your cursor on the blue box (red arrow) and select "Never check updates (not recommended)"

1.2. Okay from here to remove your automatic update windows update is done

1.3. Then turn off your computer this time in a safe way yes as usually enter in the START menu select "Shut down".

1.4. Turn on your laptop again

1.5. -Done-

You need to know that Windows users often experience this problem. The message appears because our update update settings are active. If the above does not work you try, you can try this way Preparing To Configure Windows.....